USB2.0 EZ-Gig Upgrade Kit for 2.5" Notebook Hard Drive

Note: This kit works for both 2.5" 44-Pin IDE Notebook Hard Drives & 2.5" Serial ATA Notebook hard drives.

This kit makes upgrading notebook hard drives as easy as 1-2-3. This innovative kit includes all the hardware and software needed to painlessly transfer all the data from an old hard drive to a new hard drive in 3 easy steps. If that?s not enough, EZ Upgrade transforms the old hard drive from the notebook into a portable Hi-Speed USB 2.0 external backup and/or storage solution.

3-step upgrade process:

Step One: Connect the new hard drive to your laptop computer USB port through the kit.

Step Two: Use the EZ-Clone software comes with the kit to clone your laptop hard drive operating system, data and programs to the new hard drive.

Step Three: Replace the current hard drive with new hard drive.

After you replace your old hard drive with the new hard drive, you can install the old hard drive in EZ Upgrade case to convert it to a USB hard drive and use it for backup or external storage.



Features:

Use old hard drive in EZ Upgrade case for backup and/or external storage

USB 2.0 interface (Compatible with USB1.1 Port)

Enclosure can house up to 12.7mm hard drives

EZ Gig II software program: has CloneEZ & ImageEZ

EZ Upgrade includes: EZ Gig II Data Transfer Utility, a Hi-Speed USB 2.0 hard drive enclosure, (USB 1.1 compatible) a USB cable. A 5V AC to DC power adapter & a PS/2 power cord are also included if additional power is required.

USB2.0 EZ-Gig II Notebook Hard Drive Upgrade Kit is all you will need to easily transfer everything - data, applications, documents, address books, email, settings, OS, and preferences - from the old hard drive to a new drive, in 3 easy steps.

First, connect the hardware by sliding the new hard drive into the USB enclosure and connecting to the notebook’s USB port. Second, run EZ Gig II’s cloning utility by booting to the CD. Lastly, install the new hard drive into the notebook. That’s it -you’re finished!

Once the new drive is installed, the old drive can be used in EZ Upgrade’s Hi-Speed USB 2.0 enclosure for external storage. When used with EZ Gig II, the external drive becomes a state-of-the-art backup solution.

The EZ Gig II Data Transfer Utility that ships with EZ Upgrade is comprised of two different modules: Clone EZ and Image EZ.

Clone EZ creates an exact clone of a hard drive and is perfect for upgrading hard drives, or for a creating a Disaster Recovery clone - the ultimate backup solution.

Image EZ is an ideal backup tool. Image EZ creates a compressed “image” of an entire hard drive, or an individual partition of a hard drive. At its maximum setting, Image EZ can compress data to less than 1/2 its original size, allowing backups to be made to a smaller hard drive, or multiple backups to a large hard drive.

Image EZ provides password protection for backup images, and a comments field so each image can be labeled and easily identified. Image EZ also has a File Editor that allows editing or restoration of individual files or folders.

Features:

Creates an exact bootable clone of a hard drive and transfers the data to a new hard drive via Hi-Speed USB 2.0 (USB 1.1 Compatible) for upgrading notebook hard drives.

Allows the old hard drive to be redeployed in EZ Upgrades Hi-Speed USB 2.0 enclosure. When used with the included EZ Gig II Data Transfer Utility, the external drive becomes a full-featured backup system.

Clone EZ Key Features:

Automatic and manual upgrade modes

Supports backing up or restoring data via USB 2.0, USB 1.1, PC Card or IDE

Resizes transferred partitions to match new hard disk size

Creates, copies, moves and deletes partitions

Image EZ Key Features:

User defined compression levels

Create exact disk images for complete backup

Password protect each individual image backup

Provides comments field to label each image back up

Drive Enclosure Specifications:

Data Transfer Rate - Up to 480 Mbps

Power Supply - Bus powered from USB ports, or external AC Adapter.

Approvals -FCC & CE Certified

Plug-n-Play - No drivers required for Windows XP, ME, & 2000

Hot Swappable -No need to power down, just plug it in

Supported operating systems:

Windows 98SE / Me / 2000 / XP

System requirements:

PC-compatible computer with Pentium CPU or similar

32 MB RAM

USB port (Support both USB1.1 & USB2.0, but USB 2.0 port recommended for optimal performance)

CD-ROM, CD-RW or Floppy drive

Supported operating systems:

Windows 98SE

Windows Me

Windows 2000

Windows XP /Vista

Package Contents:

Hi-Speed USB enclosure,

USB Cable

EZ Gig II Data Transfer Utility. EZ Gig II has two different utilities, Clone EZ and Image EZ.

Quick Start Guide

** Power NOTE: Whether a USB port can power a hard drive depends on the USB port itself and the hard drive you are using. If one USB port does not supply enough power to run your hard drive, you can use an optional USB Y cable to get some extra power from second USB port.



We offer an optional USB Y cable or a 5V AC Power Adapter for this kit if you need it.