HP Compaq Hard Drive Installation Guide -HPDV1000

Hard drive installation guide for HP dv1000 series, HP Compaq nx4800 series and Compaq Presario V2000 series.

  • 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • 2. Disconnect all external devices connected to the computer.
  • 3. Disconnect the power cord.
  • 4. Remove the battery pack.
  • 5. Loosen the two PM2.05.0 screws [1] that secure the hard drive cover to the computer.
  • 6. Lift the left side of the cover [2] and swing it to the right.
  • 7. Remove the hard drive cover.

  • 8. Grasp the mylar tab [1] on the left side of the hard drive and lift the hard drive [2] until it disconnects from the computer.
  • 9. Slide the hard drive to the left and remove it from the hard drive bay.
  • 10. Remove the four PM2.54.0 screws [1] that secure the hard drive frame to the hard drive.
  • 11. Lift the frame [2] to remove if from the hard drive.
  • 12. Slide the hard drive connector [3] off the hard drive.

    Reverse the above procedure to install and reassemble the hard drive.

  • For more products and latest prices, please visit our main web site at www.BiXPower.com

    © Copyright 1993-2021, BiX International Inc. All Rights Reserved.