LifeBook C325, C332, C342

System Type: Fujitsu LifeBook C Series C325, C332, C342 Laptop

CPU: Pentium II 266 MHz

Standard Memory: 32MB (soldered)

Maximum Memory: 160MB

# of Memory Slots: 1

Fujitsu® LifeBook C Series Hard Drive Installation Instructions

Turn Notebook upside down.
Remove Battery Pack and the 4 Phillips screws located under the battery.
Remove the 2 Phillips screws located on the right side of the notebook.
Turn Notebook right side up.
Remove palm rest.
Remove the flex cable from the HD and the remove the tape.
Remove the 2 Phillips screws that are securing the Hard Drive in place on the left-hand side (the 2 outside screws).
Gently slide the hard drive tray out of the compartment.
Remove the 4 screws that are holding the Hard Drive in the tray.
Place the new hard drive into the tray with the 4 screws.
Gently slide the hard drive tray back into place.
Secure the Hard Drive into place with the 2 screws from Step 7.
Attach the flex cable to the Hard Drive and the tape.
Replace the Palm Rest.
Turn Notebook upside down.
Replace the 2 screws from Step 3.
Replace the 4 Phillips screws from Step 2.
Replace the Battery Pack.

Products & accessories to help you implement a complete USB setup


How to Order How to Pay International Order BiXPower.com Sale Tax Info	About Us Contact Us Terms & Policies Testimonials Privacy & Security Info	How to Return Return Request Shipping Info Support Dealer Discount

Fujitsu LifeBook C Series C332, C342